All Products
Contact Person :
Yuki
Whatsapp :
+8618981876882
Fusion Splice Protector Sleeve For Fibre Junction Box
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Product Name | Fusion Splice Protector Sleeve For Fibre Junction Box | Use | Fiber Splice Joint Protect |
|---|---|---|---|
| Brand | Focus Infra Or OEM | Material | Heat Shrink Tube, Stainless Steel Rod, Fusion Tube |
| Application | Optical Fiber Fusion Splicing, Protecting Optical Fiber Cable | Fit For | FTTH Round Drop Cable, FTTH Flat Drop Cable |
| Length | 45mm | Diamter Of Steel Rod | 1.2mm |
| Color | Clear | Operating Temperation | -45°C To +120°C |
| Place Of Origin | China | Pack | 50pcs/bag Or Negotiable |
| High Light | FTTH Fusion Splice Protector Sleeve,Fibre Junction Box Splice Sleeve,OEM Fiber Heat Shrink Sleeves |
||
Product Description
Fusion Splice Protector Sleeve For Fibre Junction Box
Description:
Fusion Splice Protector Sleeve For Fibre Junction Box We Also Called it as “fiber splice sleeves”, “fiber optic protection sleeve”, “ fiber optic cable protection sleeve”. This Fusion Splice Protector Sleeve is used as a protective element for outdoor or indoor cable and between indoor cable and single core fiber jumper.
Same as Single Fiber Optic Splice Protect Sleeves, this Drop Cable Joint Protect Fiber Heat Shrink Protector is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber cable splices. It is friendly operated to the optic fiber cable during installation without damaged and micro bending.
Features:
1. Transparent color to make it easy to detect splice before shrinkage
2. Airproof structure keeping the splice point's good resistance of humidity and temperature
3. Easily use and avoid any damages to the optical fiber during installation
4. Single holed(preshrunk) ends eliminates improper fiber threading
5. Quickly shrink, improving work efficiency
6. Strong practicality
7. extend the service life of the fiber
8. No air bubbles, no fiber breakage
Technical Parameters:
|
Specification |
Test method |
Typical data |
|
Tensile strength(MPa) |
ASTM D 2671 |
18 |
|
Elongation at Break (%) |
ASTM D 2671 |
700 |
|
Density(g/cm2) |
ISO R1183D |
0.94 |
|
Dielectric strength (KV/mm) |
IEC 243 |
20 |
|
Permittivity |
IEC 243 |
2.5 |
|
Length rate of change (%) |
ASTM D 2671 |
+5 |
Recommended Products