40mm Ribbon Fiber Splice Sleeve For FTTH FTTX FTTB Network

40mm Fiber Cable Splice Double Steel Rod FTTH Fiber Heat Shrink Sleeves

Description:

  Fiber Heat Shrink Sleeve We Also Called it as “FTTH Drop Splice Closure”, “FTTH Drop Repair Splice Closure ”, “ FTTH Drop Repair joint kits”. This Fiber Heat Shrink Sleeve is used in FTTH Drop Cable Connection. We use this Fiber Heat Shrink Sleeve to make heat Shrinkable Splice with 2pcs Drop Cable (Or Drop Cable SC Connector Terminated one side). Designed for either Flat Drop Cable or Round Drop Cable. this Fiber Heat Shrink Sleeve is installed indoor or Outdoor, provide good connection and protection in FTTH Constructions.

  Consist of a rod of reinforcing the splice, hot fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties;

  Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation.

The Fiber Heat Shrink Sleeve is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily.

Features:

High transparent fiber fusion splicing heat shrinkable tube

1.0mm thick high quality stainless steel

40mm non-stick inner wall, fast welding

No air bubbles, no fiber breakage

Quality assurance, both single and double needles

Technical Parameters: