L60mm Fiber Optic Splice Sleeves Dia 2.7mm Heat Shrink Splice Protector

L60mm Standard Diameter 2.7mm Transparent Fiber Optic Splice Sleeves

Description:

 A Fiber Optic Splice Sleeve is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. It is friendly operated to the optic fiber during installation without damaged and micro bending.

How to use a Fiber Optic Splice Sleeve?

 The Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. We must be installed on the optical fiber before fiber fusion (otherwise, you will have to break the optical fiber and start again).

 First, slide the Fiber Optic Splice Sleeve onto the optical fiber.

 Then weld the two optical fibers. After the welding is completed, slide the sleeve onto the optical fiber fusion point and cover the connect point and the exposed optical fiber.

 Third, put the protective sleeve into the protective sleeve oven built in the welding machine. There, the Fiber Optic Splice Sleeve is heated to melt and contract around the joint.

 Because the Fiber Optic Splice Sleeve has steel rods, a mechanical protection is formed to prevent the fiber from bending. The contraction of the tube around the optical fiber also forms an environmental protection to keep the element away from the connector.

Product parameter:

Product name: fiber heat shrinkable tube

Steel needle material: 304 stainless steel rod

Outer skin material: environmentally friendly PE

Product unit: 100 pcs per bag

Length dimension: 60 mm 45 mm 40 mm

Product color: transparent

Technical Parameters: