All Products
Contact Person :
Yuki
Whatsapp :
+8618981876882
30mm Fiber Heat Shrink Sleeves ISO R1183D Splice Protection ASTM D 2671
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Product Name | 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves | Use | Fiber Fusion Splicing Protection |
|---|---|---|---|
| Brand | Focus Infra | Material | Heat Shrink Tube, 304 SUS Rod, Fusion Tube |
| Application | Optical Fiber Fusion Splicing, Protecting Optical Fiber Cable | Fit For | CWDM, DWDM Or More Smaller Application |
| Length | 30mm | Diamter Of Steel Rod | 0.5 Mm |
| Diameter After Shrink | 1.4 Mm | Steel Rod Pin | 1 |
| Color | Clear | Operating Temperation | -45°C To +120°C |
| Place Of Origin | China | Pack | 100pcs/bag Or 200pcs/bag |
| High Light | 30mm fiber heat shrink sleeves,splice protection ASTM D 2671,ISO R1183D splice protection |
||
Product Description
0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves
Description:
Fiber Optic Heat Shrinkable Sleeves is used to protect the optical fusion fiber. The construction of the three protective and strengthening elements of the Fiber Optic Sleeve is distinctive in the function that each provides. The inner stainless steel pin keeps the sleeve rigid and stable. The pin is vibratory tumbled with a special medium. This eliminates the possibility of fiber scarring or material penetration, both of which could damage the sensitive glass fibers. The inner tube is made of a specially designed material that compresses. The fiber splice becomes encapsulated within the inner tube. The outer tube is made of a heat-shrinking polyolefin. This encloses the inner tube and the encapsulated fiber splice, providing double protection and ensuring that moisture and air are eliminated from the fiber splice.
0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is designed for 250μm bare fiber splicing protection. Length is 30mm only, it is special used in smaller application, such as CWDM, DWDM ect. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is commonly known as an optical fiber heat shrink protect sleeve. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is widely used in communication optical fiber splicing projects, it is consisted of a special cross-linked polyolefin, a hot melt tube and a strengthen member.
Features:
1. Provide mechanical and environmental protection for fusion splices
2. Optimal design for simple and correct fiber entrance
3. Hot melt adhesive especially developed for optimal flow
4. Transparent heat shrinkable tube for simple installation verification
5. Short installation cycle and compatible with most common ovens
6. Specially designed by the cross-linked polyolefin,hot melt tube and enhanced stainless steel wire/ ceramic/quartz optical fiber splice protection devices,does not affect the fiber optic light guide features.
7. protect splices and improve the mechanical strength.
8. simple operation, reduce the risk of damage fiber installation.
Technical Parameters:
|
Specification |
Test method |
Typical data |
|
Tensile strength(MPa) |
ASTM D 2671 |
18 |
|
Elongation at Break (%) |
ASTM D 2671 |
700 |
|
Density(g/cm2) |
ISO R1183D |
0.94 |
|
Dielectric strength (KV/mm) |
IEC 243 |
20 |
|
Permittivity |
IEC 243 |
2.5 |
|
Length rate of change (%) |
ASTM D 2671 |
+5 |
Recommended Products